Not logged in. · Lost password · Register
Forum: VfL Hainfeld
Abschlussfahrt 2010 – Düsseldorf
josef geiger #1
Member since Dec 2007 · 3 posts
Group memberships: Mitglieder
Show profile · Link to this post
Subject: Abmeldung
Werte Sportkameraden,
es ist schade, aber unumgänglich und eigentlich ein sehr schlechtes Zeugnis für die Einstellung von einigen. Mit heutigem Datum wurde die Zweite des VfL aus dem aktiven Spielbetrieb abgemeldet, nachdem sich kurzfristig mehrere Spieler nicht zum erstenmal abgemeldet haben. Auch für die Gegner ist dies schade. Es ist keine Schande für den VfL und die, die sich um die Elf kümmerten, sondern für die Unzuverlässigen. Der Spielausschuss bedankt sich recht herzlich bei den Jungs, auf die Verlass war und weiterhin ist. Diese werden zum Kader der Ersten genommen. Schaun wir mal für nächste Runde in der Kreisklasse.
Phil G #2
Member since Dec 2005 · 39 posts · Location: 76835 Hainfeld
Group memberships: Mitglieder
Show profile · Link to this post
Subject: Abschlussfahrt 2010 – Düsseldorf
Sehr geehrte Sportskameraden,      

Unsere traditionelle Abschlussfahrt im Juni führt uns von Freitag, den 04. Juni 2010 bis Sonntag, den 06. Juni 2010 mit dem Zug nach Düsseldorf.

Leistungen:
2 x Übernachtung im DZ inkl. Frühstück (NH Hotel Düsseldorf City, 4 Sterne)
Zugfahrt (Nahverkehr)

Kosten:
110 € für Zugfahrt und Hotel
Individuelle, sonstige Ausgaben

Falls ein paar Euro übrig bleiben sollten, werden davon Getränke für die Hinfahrt gekauft.

Zwecks baldiger Buchung bitte auf der Liste im Sportheim bis 04.05.10 verbindlich anmelden.

Gruß Philipp
Phil G #3
Member since Dec 2005 · 39 posts · Location: 76835 Hainfeld
Group memberships: Mitglieder
Show profile · Link to this post
Subject: Abschlussfahrt 2010 – Düsseldorf
Treffpunkt: Freitag, 04.06.2010 um 9.15 Uhr in Edesheim am Bahnhof (frühere Abfahrt nicht möglich, da Ländertickets erst ab 9 Uhr zählen)

Bitte Marcel in den nächsten Tagen ansprechen zwecks Kühltaschen für die Zugfahrt. Bin bis 03.06. in Urlaub und nicht erreichbar.

Grüße Philipp

PS: Rückkehr am Sonntag, den 06.06.2010 wird gegen 19.30 Uhr sein.
cherry2411114 #4
Member since Oct 2011 · 10 posts
Group memberships: Mitglieder
Show profile · Link to this post
In reply to post #1
Subject: my Coding
1?In a  Shaded Pole Motorlike a paint booth or grain elevator an explosion proof motor may be required to prevent the possibility of a spark igniting the Grill Motor. Even with all the available motors there is often the need for a custom motor to meet a specific torque and speed requirement, environmental condition or operate from a specific voltage and current.  DC Geared MotorThese might be either AC or DC types based on the specific application.
AC motors generally fall into one of two categories, synchronous or asynchronous types. Synchronous motors synchronize with the frequency of the alternating current whereas asynchronous motors run at a slightly slower speed relative to synchronous speed. Planetary Gear Motor The difference in output speed of asynchronous motors compared to synchronous  Induction Electric Motorspeed is referred to as slip.
2?  Mooring Ropes Elasticity is an important feature to look out for in any water ski rope. The stretch and elasticity of the rope plays a dominant role while a skier maneuvers the curves. This feature will also play  Nylon Twinewhen going slalom skiing. The stretch feature acts as a good shock absorber when the skis jump the wakes left behind by the boat UHMWPE Tow Rope.
 8-Strand Mooring RopeThe length of a ski rope measures totally around 75 feet including the bar of the rope handle. Unique styles of water skiing will necessitate varying lengths. Winch Rope Generally these ropes come in multi colors and sections of the ropes are colored differently to help identify the points where the ropes can be shortened depending on the sport version. In slalom skiing, you can try your hand with different lengths while mastering this sport.  Jute TwineMost trick skiers need around 50 feet of rope only.
3?- De Dental Unit the trends and developments that are driving the anesthesia and respiratory devices market globally.
- Design and develop your product development, marketing and sales strategies.
- Exploit M&A opportunities by identifying market players with the most innovative pipeline.
medical id bandsand market expansion strategies.
Medical Tubes positioned to take advantage of the emerging market opportunities.
X ray Unitand out-licensing opportunities by identifying products,  ENT Units.
Medical Stethoscope
4? Auto parts mould(DC) motors were invented in the early 19th century following experiments by Michael Faraday and others. DC motors continued to be improved upon along with DC generators to the time  Auto lamp mould first power plant and DC power  Refrigerator mould
 Container blow mouldpractical solution for the electrification of the United States however because of the large conductors required to transmit the low voltage power from the  Plastichandle.
George Westinghouse backed Nicolas Teslas promotion of alternating current (AC) that could be transformed from low voltage to high voltage for efficient long distance transmission, then back down again to supply homes and industry. AC electrification of the US was the only practical solution.
5? reverse osmosis home systemsis readily available or when duty cycles are low like for vehicle starter motors.  water filter bottle DC motors have brushes and a commutator that work together to automatically switch current to different windings in order to  water pitcher. DC torque motors are designed to provide smooth controllable torque to a load typically below 1000 rpm, and often within a limited angle of motion. Torque motors may also be of the AC type. Examples include feed or take up rolls on  granular activated carbon filter cartridgeor as an actuator to vary the opening of a valve or move a flight surface.
6? elevator buffera swab test carried out in a Manhattan office by Dr. Charles Gerba, elevator buttons of thousands of bacteria on hot spots like a printer button and the button for the first floor in the elevator, touched by hundreds of fingers each day. voltage monitoring relay none of the bacteria Gerba found was life-threatening, they could lead to more colds and flu. So what should you do to combat the nasty germs that can literally be found anywhere  Cross Flow Fan?
7? Automatic Door Operators small business owners who dont hire professional cleaning services usually leave office cleaning to their employees, in hopes of saving a few extra dollars.  Automatic Sliding Doors it comes down to it, these business owners arent actually saving any money in fact, they can
  Automatic Swing Doors, as employee sick days place a strain on both the finances and productivity of a company. For example, in 2007 alone, sick days cost the British economy 100 billion pounds, with the average person taking up to 7 sick days a year. Its not just the British economy thats suffering: in almost every country, most of the illnesses that keep the average Door Accessoriesat home are in fact due to germs found in the typical workplace.
8?It makes  G4 LEDe that there are more reasons than not to hire office cleaning services; after all,  Flexible LED Strips to the protection of your employees health not to mention that of your own a commercial cleaning company can offer your office the kind of protection that you can feel comfortable about. Besides, no one wants to touch elevator buttons that are covered with germs or  High Power LED Spotlights could be covered in waste residue so call your local professional cleaning company today!
 Dimmable LED Under Cabinet Lighting
9?As people often factor replacement costs into the  non-woven bag making machine on a subconscious level, another key benefit to point out to both commercial and residential clients is the exceptionally long life of a  PE Film Blowing Machinerotogravure printing machine a 50,000 hour average lamp  conserve landfill life compared to the 20,000 hours for Xenon festoons and the meager 7,500 hours for incandescents. Keep in mind as well that other technologies offer only a fraction of the lumens produced by the 1.7 watt LED lamp. Typically, many festoon lamps use a combination of  flexo printing machine toppled together to ultimately produce only a meager 10 lumens of output.
10?Alter your aged and damaged pipe production line with all  plastic extruderinnovation of  sheet extrusion line.
"PVCpipeproduction line. The first of all, it will advice help save our planet's bound assets for approaching generations. Moreover, recycling will conserve landfill, cogent after-effects are
feijingjing #5
Member for 3 months · 23 posts
Group memberships: Mitglieder
Show profile · Link to this post
Subject: gfdg
1?Wire Mesh Fences by stainless steel wire,low carbon steel wire and other components,stainless steel surface by electrolysis, tin processing,very solid, the production process of turnover basket by weaving,stamping,welding,barbecue grill according to different material or product structure,beautiful,test tube frame easy to use its strong,high temperature resistant;decorative wire baskets more difficult deformation,shapes,species diversity.
2?Foton Tractors is it is a more complex machine,BOMR Tractors type and size are different,butCompact Wheel Loader all by the engine,chassis and electrical equipment of the three major components.Wheel Loader Spare Parts have many types,it is also the agricultural production and the rich get rich good helper,for Perkins Engine Parts,not only will the choose and buy,the good maintenance,correct operation is also very important.

3?Hydraulic oil, machinery oil, cooling oil lubricating oil during operation, volatile substances and impurities due to various reasons, will inevitably enter the lubrication,reduces the oil lubrication, heat dissipation, dispersion, cooling performance.  Hydraulic oil filtersusing high quality filters, a large quantity of pollutants, high temperature and so on, Hydraulic oil filter can quickly remove oil in the  impurity and volatile matter ( gasoline, diesel, kerosene and other), Ingersoll Rand filtersuses the compact design, can also provide the best performance, but also improve oil quality, restore lubrication oil viscosity, flash point and the use of performance. Ensure that the hydraulic system, power system, lubrication system normal operation.
Close Smaller – Larger + Reply to this post:
Verification code: VeriCode Please note the verification code from the picture into the text field next to it.
Smileys: :-) ;-) :-D :-p :blush: :cool: :rolleyes: :huh: :-/ <_< :-( :'( :#: :scared: 8-( :nuts: :-O
Special characters:
Go to forum
This board is powered by the Unclassified NewsBoard software, 20090305-dev, © 2003-7 by Yves Goergen
Page created in 114.1 ms (77.7 ms) · 59 database queries in 8.7 ms
Current time: 2012-02-04, 12:27:28 (UTC +02:00)